losing setting in fcurve editor 2004-06-10 - By Dan Yargici
Back
OK I've tried doing it in every order possible (closing the preferences first,
then the AE first, etc, etc...) and I still get the same result.
If you leave the preferences open, you see that it's when you open the AE that
it changes not when you close it.
Strange. I can repro it very easily...
DAN
-- -- Original Message -- --
From: Pierre Duranleau
To: XSI@(protected)
Sent: Thursday, June 10, 2004 10:07 PM
Subject: RE: losing setting in fcurve editor
Here's the thing Dan.
When you turn on preferences.fcurve_editor.show_keys_always then click on the
window's X 'icon' to exit and close that AE window, you're in effet savong the
prefs for the AE. That's why in our case we cannot reproduce the problem. I
mentioned a refrsh issue earlier, but was not exactly right, I should have
mentioned that must exit the window in order to 'save' the prefs. Does that
make sense. Can you pls try it that way on your end and let us know if you
still experience the same issues.
Pierre Duranleau
3D Graphics Support - Escalation
mailto:pierred@(protected)
SI support: mailto:support@(protected)
SI web: http://www.softimage.com
my web: http://www.cafargo.com
Visit XSI Net for custom shaders, add-ons, and more...
-- --Original Message-- --
From: owner-xsi@(protected) [mailto:owner-xsi@(protected)]On Behalf Of
Dan Yargici
Posted At: 10 juin 2004 14:34
Posted To: xsi
Conversation: losing setting in fcurve editor
Subject: Re: losing setting in fcurve editor
No, I can't see how it could be, the check box toggles off the second you
open the AE. i.e. it's not just not showing the points, it toggles off the
preference in front of you!
CreatePrim "Cone", "MeshSurface"
SaveKey "cone.kine.local.posx,cone.kine.local.posy,cone.kine.local.posz", 1
LastFrame
Translate , 0, 3.3865724442665, 0, siRelative, siGlobal, siObj, siXYZ, , ,
, , , , , , , 0
SaveKey "cone.kine.local.posx,cone.kine.local.posy,cone.kine.local.posz",
100
InspectObj "preferences.fcurve_editor", "all", "FCurveEditor Preferences",
":siLockAndForceNew:siInspectMode"
SetValue "preferences.fcurve_editor.show_keys_always", True
Keep the preferences window open. Now open the AE and watch it switch off.
....
DAN
-- -- Original Message -- --
From: "Pierre Duranleau" <pierrd@(protected)>
To: <XSI@(protected)>
Sent: Thursday, June 10, 2004 9:39 PM
Subject: RE: losing setting in fcurve editor
> I tried it on my end too, and I've done what Matt did and it works fine.
Might also be a refresh issue. If you still obtain the same results, then
perhaps you should take a look at your grfx card and drv situation, as there
might a display issue in your case.
>
> Pierre Duranleau
> 3D Graphics Support - Escalation
> mailto:pierred@(protected)
> SI support: mailto:support@(protected)
> SI web: http://www.softimage.com
> my web: http://www.cafargo.com
> Visit XSI Net for custom shaders, add-ons, and more...
>
>
> -- --Original Message-- --
> From: owner-xsi@(protected) [mailto:owner-xsi@(protected)]On Behalf
> Of Matt Morris
> Posted At: 10 juin 2004 14:13
> Posted To: xsi
> Conversation: losing setting in fcurve editor
> Subject: RE: losing setting in fcurve editor
>
>
> What version of XSI are you evaluating?
>
> On 3.5.1 I don't have any problems with it forgetting animation editor
> settings, haven't tried .4 though.
>
> This might be a bit basic but have you tried changing the setting sin the
> drop down menu AND the file/preferences option in the editor?
>
> Next thing is to change the setting once in an editor and close it down,
> then open multiple windows and the setting should apply to all...
>
> Other than that it might well be a bug with your install, possibly a
> question for the reseller/official support guys...
>
> Matt
>
>
> -- --Original Message-- --
> From: owner-xsi@(protected) [mailto:owner-xsi@(protected)]On Behalf
> Of Andrew Lindsay
> Sent: 10 June 2004 18:07
> To: XSI@(protected)
> Subject: losing setting in fcurve editor
>
>
> Hello folks, we are evaluating XSI as our main package, love the
> modeling. A quick question though.
>
> I set fcurve editor preferences to 'show keys on unselected curves' then
> pressing '0' for another fcurve editor, that setting is lost. Any
> suggestions for eejut user?
>
>
>
>
> ---
> Unsubscribe? Mail Majordomo@(protected) with the following text in body:
> unsubscribe xsi
>
>
> ---
> Unsubscribe? Mail Majordomo@(protected) with the following text in body:
> unsubscribe xsi
>
> ---
> Unsubscribe? Mail Majordomo@(protected) with the following text in body:
> unsubscribe xsi
>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859 (See http://iso-8859.ora-code.com)-1">
<META content="MSHTML 6.00.2800.1400" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2>OK I've tried doing it in every order possible
(closing the preferences first, then the AE first, etc, etc...) and I still get
the same result.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>If you leave the preferences open, you see that
it's when you open the AE that it changes not when you close it.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Strange. I can repro it very
easily...</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>DAN</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<BLOCKQUOTE dir=ltr
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT:
#000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">-- -- Original Message -- -- </DIV>
<DIV
style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black"><B>From:</B>
<A title=pierrd@(protected) href="mailto:pierrd@(protected)">Pierre
Duranleau</A> </DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A title=XSI@(protected)
href="mailto:XSI@(protected)">XSI@(protected)</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Thursday, June 10, 2004 10:07
PM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> RE: losing setting in fcurve
editor</DIV>
<DIV><BR></DIV>
<DIV><SPAN class=857530319-10062004><FONT face=Arial color=#0000ff
size=2>Here's the thing Dan. </FONT></SPAN></DIV>
<DIV><SPAN class=857530319-10062004><FONT face=Arial color=#0000ff size=2
>When
you turn on preferences.fcurve_editor.show_keys_always then click on the
window's X 'icon' to exit and close that AE window, you're in effet savong
the
prefs for the AE. That's why in our case we cannot reproduce the problem. I
mentioned a refrsh issue earlier, but was not exactly right, I should have
mentioned that must exit the window in order to 'save' the prefs. Does that
make sense. Can you pls try it that way on your end and let us know if you
still experience the same issues.</FONT></SPAN></DIV>
<DIV> </DIV>
<P><FONT face=Arial size=1>Pierre Duranleau</FONT> <BR><FONT face=Arial
color=#800000 size=1>3D Graphics Support - Escalation</FONT> <BR><FONT
face=Arial color=#808080 size=1><A href="mailto:pierred@(protected)"
target=_blank>mailto:pierred@(protected)</A></FONT> <BR><FONT face=Arial
color=#800000 size=1>SI support</FONT><FONT face=Arial size=1>: </FONT><FONT
face=Arial color=#808080 size=1><A href="mailto:support@(protected)"
target=_blank>mailto:support@(protected)</A></FONT> <BR><FONT face=Arial
color=#800000 size=1>SI web</FONT><FONT face=Arial
size=1>: </FONT><FONT face=Arial color=#808080
size=1><A href="http://www.softimage.com/"
target=_blank>http://www.softimage.com</A></FONT> <BR><FONT face=Arial
color=#800000 size=1>my web</FONT><FONT face=Arial size=1>: </FONT><FONT
face=Arial color=#808080 size=1> <A href="http://www.cafargo.com/"
target=_blank>http://www.cafargo.com</A></FONT> <BR><FONT face=Arial
color=#0000ff size=1>Visit XSI Net for custom shaders, add-ons, and
more...</FONT> </P>
<BLOCKQUOTE>
<DIV class=OutlookMessageHeader dir=ltr align=left><FONT face=Tahoma
size=2>-- --Original Message-- --<BR><B>From:</B> owner-xsi@(protected)
[mailto:owner-xsi@(protected)]<B>On Behalf Of </B>Dan Yargici<BR><B
>Posted
At:</B> 10 juin 2004 14:34<BR><B>Posted To:</B> xsi<BR><B>Conversation:</B>
losing setting in fcurve editor<BR><B>Subject:</B> Re: losing setting in
fcurve editor<BR><BR></FONT></DIV>
<DIV><FONT face=Arial size=2>No, I can't see how it could be, the check box
toggles off the second you open the AE. i.e. it's not just not
showing
the points, it toggles off the preference in front of you!</FONT></DIV>
<DIV>
<P><FONT face=Arial color=#0000ff size=2>CreatePrim "Cone",
"MeshSurface"</FONT></P>
<P><FONT face=Arial color=#0000ff size=2>SaveKey
"cone.kine.local.posx,cone.kine.local.posy,cone.kine.local.posz",
1</FONT></P>
<P><FONT face=Arial color=#0000ff size=2>LastFrame</FONT></P>
<P><FONT face=Arial color=#0000ff size=2>Translate , 0, 3.3865724442665, 0,
siRelative, siGlobal, siObj, siXYZ, , , , , , , , , , 0</FONT></P>
<P><FONT face=Arial color=#0000ff size=2>SaveKey
"cone.kine.local.posx,cone.kine.local.posy,cone.kine.local.posz",
100</FONT></P>
<P><FONT face=Arial color=#0000ff size=2>InspectObj
"preferences.fcurve_editor", "all", "FCurveEditor Preferences",
":siLockAndForceNew:siInspectMode"</FONT></P>
<P><FONT face=Arial color=#0000ff size=2>SetValue
"preferences.fcurve_editor.show_keys_always", True</FONT></P></DIV>
<DIV><FONT face=Arial size=2>Keep the preferences window open. Now
open the AE and watch it switch off.....</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>DAN</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>-- -- Original Message -- -- </FONT>
<DIV><FONT face=Arial size=2>From: "Pierre Duranleau" <</FONT><A
href="mailto:pierrd@(protected)"><FONT face=Arial
size=2>pierrd@(protected)</FONT></A><FONT face=Arial
size=2>></FONT></DIV>
<DIV><FONT face=Arial size=2>To: <</FONT><A
href="mailto:XSI@(protected)"><FONT face=Arial
size=2>XSI@(protected)</FONT></A><FONT face=Arial size=2>></FONT></DIV>
<DIV><FONT face=Arial size=2>Sent: Thursday, June 10, 2004 9:39
PM</FONT></DIV>
<DIV><FONT face=Arial size=2>Subject: RE: losing setting in fcurve
editor</FONT></DIV></DIV>
<DIV><FONT face=Arial><BR><FONT size=2></FONT></FONT></DIV><FONT face=Arial
size=2>> I tried it on my end too, and I've done what Matt did and it
works fine. Might also be a refresh issue. If you still obtain the same
results, then perhaps you should take a look at your grfx card and drv
situation, as there might a display issue in your case.<BR>> <BR>>
Pierre Duranleau<BR>> 3D Graphics Support - Escalation<BR>> </FONT><A
href="mailto:pierred@(protected)"><FONT face=Arial
size=2>mailto:pierred@(protected)</FONT></A><BR><FONT face=Arial
size=2>> SI support: </FONT><A href="mailto:support@(protected)"><FONT
face=Arial size=2>mailto:support@(protected)</FONT></A><BR><FONT
face=Arial size=2>> SI web: </FONT><A
href="http://www.softimage.com"><FONT face=Arial
size=2>http://www.softimage.com</FONT></A><BR><FONT face=Arial size=2>>
my web: </FONT><A href="http://www.cafargo.com"><FONT face=Arial
size=2>http://www.cafargo.com</FONT></A><BR><FONT face=Arial size=2>>
Visit XSI Net for custom shaders, add-ons, and more...<BR>> <BR>>
<BR>> -- --Original Message-- --<BR>> From: </FONT><A
href="mailto:owner-xsi@(protected)"><FONT face=Arial
size=2>owner-xsi@(protected)</FONT></A><FONT face=Arial size=2>
[mailto:owner-xsi@(protected)]On Behalf<BR>> Of Matt Morris<BR>>
Posted At: 10 juin 2004 14:13<BR>> Posted To: xsi<BR>> Conversation:
losing setting in fcurve editor<BR>> Subject: RE: losing setting in
fcurve editor<BR>> <BR>> <BR>> What version of XSI are you
evaluating?<BR>> <BR>> On 3.5.1 I don't have any problems with it
forgetting animation editor<BR>> settings, haven't tried .4
though.<BR>> <BR>> This might be a bit basic but have you tried
changing the setting sin the<BR>> drop down menu AND the file
/preferences
option in the editor?<BR>> <BR>> Next thing is to change the setting
once in an editor and close it down,<BR>> then open multiple windows and
the setting should apply to all...<BR>> <BR>> Other than that it
might
well be a bug with your install, possibly a<BR>> question for the
reseller/official support guys...<BR>> <BR>> Matt<BR>> <BR>>
<BR>> -- --Original Message-- --<BR>> From: </FONT><A
href="mailto:owner-xsi@(protected)"><FONT face=Arial
size=2>owner-xsi@(protected)</FONT></A><FONT face=Arial size=2>
[mailto:owner-xsi@(protected)]On Behalf<BR>> Of Andrew Lindsay<BR>>
Sent: 10 June 2004 18:07<BR>> To: </FONT><A
href="mailto:XSI@(protected)"><FONT face=Arial
size=2>XSI@(protected)</FONT></A><BR><FONT face=Arial size=2>> Subject
:
losing setting in fcurve editor<BR>> <BR>> <BR>> Hello folks, we
are evaluating XSI as our main package, love the<BR>> modeling. A quick
question though.<BR>> <BR>> I set fcurve editor preferences to 'show
keys on unselected curves' then<BR>> pressing '0' for another fcurve
editor, that setting is lost. Any<BR>> suggestions for eejut
user?<BR>> <BR>> <BR>> <BR>> <BR>> ---<BR>> Unsubscribe?
Mail </FONT><A href="mailto:Majordomo@(protected)"><FONT face=Arial
size=2>Majordomo@(protected)</FONT></A><FONT face=Arial size=2> with the
following text in body:<BR>> unsubscribe xsi<BR>> <BR>> <BR>>
---<BR>> Unsubscribe? Mail </FONT><A
href="mailto:Majordomo@(protected)"><FONT face=Arial
size=2>Majordomo@(protected)</FONT></A><FONT face=Arial size=2> with the
following text in body:<BR>> unsubscribe xsi<BR>> <BR>> ---<BR>>
;
Unsubscribe? Mail </FONT><A href="mailto:Majordomo@(protected)"><FONT
face=Arial size=2>Majordomo@(protected)</FONT></A><FONT face=Arial size=2
>
with the following text in body:<BR>> unsubscribe xsi<BR>>
</FONT></BLOCKQUOTE></BLOCKQUOTE></BODY></HTML>
|
|
