Models with Displacement 2004-04-16 - By kim aldis
Back
You might want to up the max subdivision parameter. The way this works, the
mesh will be subdeed down to either the max level or the length, whichever
comes first. If you're close up to a coarse mesh you may find it won't
subdee far enough, in which case give your mesh more detail. In view
dependancy, length is the diagonal length of a pixel. You might also try
messing with the sharpness parameter.
> -- --Original Message-- --
> From: owner-xsi@(protected)
> [mailto:owner-xsi@(protected)] On Behalf Of Dan Yargici
> Sent: 16 April 2004 13:13
> To: XSI@(protected)
> Subject: Re: Models with Displacement
>
> Here's an example...
>
> http://www.danyargici.com/TEMP/facet.jpg
>
> Cheers.
>
> -- -- Original Message -- --
> From: "kim aldis" <kim@(protected)>
> To: <XSI@(protected)>
> Sent: Friday, April 16, 2004 3:07 PM
> Subject: RE: Models with Displacement
>
>
> > what kind of settings are you using, Dan.
> >
>
> ---
> Unsubscribe? Mail Majordomo@(protected) with the following
> text in body:
> unsubscribe xsi
>
>
>
---
Unsubscribe? Mail Majordomo@(protected) with the following text in body:
unsubscribe xsi
|
|
