Thick Cloth 2004-02-19 - By Oz Adi
Back
I did quite alot of syflexing last month.
a suggestion is to do the simulation on a grid, and *after* it's done and
cached, select all of the grid's polygons,
and extrude them on axis, to give the cloth thickness. the new polygons
should be "weighted" in the symulation.
I am not sure how good will it work, I used this method to add thickness
and stitches bumps to the side of my clothes,
and it worked perfectly..
www.coolcalb.com/pix/cloth.jpg
in the example I show, I was asked to make them real gentle, but initialy, I
made them thicker and rougher, and it worked fine.
cheers,
Oz
www.coolcalb.com
-- -- Original Message -- --
From: "Sandy Sutherland" <sandy@(protected)>
To: <XSI@(protected)>
Sent: Thursday, February 19, 2004 9:33 AM
Subject: Re: Thick Cloth
> I would think that both syflex and xsi cloth would need to be
'solidified',
> to make a thick cloth model - if you mean thick acting (stiffer), then you
> can just change the bend spring paramter in either cloth solver!
>
> S.
>
> -- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- -----
> Sandy Sutherland Digital Doodeller/Technical Director
> The Refinery (Cape) http://www.refinery.co.za
> mailto:sandy@(protected)
> (P) (+27 21) 480 3333 (F) (+27 21) 480 3101
> -- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- -----
> -- -- Original Message -- --
> From: "Roberto Sarlenga" <roberto_sarlenga@(protected)>
> To: <XSI@(protected)>
> Sent: Thursday, February 19, 2004 5:24 AM
> Subject: Thick Cloth
>
>
> Hi,
>
> Anyone knows if syflex has any paramter to make thick cloth?
>
> I�m working on a cartoony character which should be sleeping under a thick
> blanket, which reacts to his movements.
>
> Or should I use XSI cloth with the solidify plugin from mindthink?
>
> I�ll apreciate any help,
> Rob
>
> ---
> Unsubscribe? Mail Majordomo@(protected) with the following text in body:
> unsubscribe xsi
>
>
> ---
> Unsubscribe? Mail Majordomo@(protected) with the following text in body:
> unsubscribe xsi
>
---
Unsubscribe? Mail Majordomo@(protected) with the following text in body:
unsubscribe xsi
|
|
