 | | | Satellite rendering in linux | Satellite rendering in linux 2005-05-30 - By Alan Jones
Back
Hi,
Sorry if I posted the wrong telnet results - I tried both with
identical results.
Cheers,
Alan.
On 5/30/05, S�bastien Dion <sdion@(protected)> wrote:
> If you are on Linux the services file is located in /etc/
>
> -- ---- ---- ---- ---- ---- ---- ---- --
> S�bastien Dion
> Softimage|Avid Graphics Support Engineer
> Customer Support Hotline: 1.800.387.2559
> mailto:sdion@(protected)
> mailto:support@(protected)
> http://www.softimage.com
>
>
>
> -- --Original Message-- --
> From: owner-xsi@(protected) [mailto:owner-xsi@(protected)]On Behalf
> Of S�bastien Dion
> Sent: Monday, May 30, 2005 11:08 AM
> To: XSI@(protected)
> Subject: RE: Satellite rendering in linux
>
>
> HI
>
> If you want to use the Satellites, you should telnet using the
satellite service instead of the Mental Ray service. When you install XSI you
have the choice during the install to install mi-raysatxsi_4.2 and/or mi
-ray3xsi_4.2. Please not the correct port for the satellite service, because you
will need to specify it in the .ray3hosts. You CAN'T test satellite by opening
a command prompt and typing ray3. Ray3 will use MR stand Alone licenses.
Satellites will use the licenses any product (Advanced, essential and batch)
these licenses will permit 4 tcp/ip connection for satellites.
>
> The syantax in the .ray3hosts file should be like this :
>
> slave_name:7010 (or any other port set during the setup)
>
> You want to test it? From the Master you telnet slave_name port_used_bysat
_service
>
> You can modify any ports for services in the services file located in c:
\windows\system32\drivers\etc
>
> Be sure that no firewall will block the ports.
>
> -- ---- ---- ---- ---- ---- ---- ---- --
> S�bastien Dion
> Softimage|Avid Graphics Support Engineer
> Customer Support Hotline: 1.800.387.2559
> mailto:sdion@(protected)
> mailto:support@(protected)
> http://www.softimage.com
>
>
>
> -- --Original Message-- --
> From: owner-xsi@(protected) [mailto:owner-xsi@(protected)]On Behalf
> Of Alan Jones
> Sent: Sunday, May 29, 2005 3:58 PM
> To: xsi@(protected)
> Subject: Satellite rendering in linux
>
>
> Hi All,
>
> Not sure what's not happening here, I've got satellite rendering
> almost working.. If I telnet I get the following..
>
> telnet buzz mi-ray3xsi4_2
> Trying 192.168.0.38...
> Connected to buzz.
> Escape character is '^]'.
> Connection closed by foreign host.
>
> And running ray3 -verbose on gives me
>
> MSG 0.0 info : reading hosts file /home/paul/.ray3hosts
> MSG 0.0 info : connecting host buzz:7010
> MSG 0.0 error 011213: cannot receive welcome message from host 1 (active)
> MSG 0.0 error 011702: cannot connect(2) host buzz:7010
>
> Any ideas on where the error lies?
>
> Cheers,
>
> Alan.
>
> ---
> Unsubscribe? Mail Majordomo@(protected) with the following text in body:
> unsubscribe xsi
>
> ---
> Unsubscribe? Mail Majordomo@(protected) with the following text in body:
> unsubscribe xsi
>
> ---
> Unsubscribe? Mail Majordomo@(protected) with the following text in body:
> unsubscribe xsi
>
---
Unsubscribe? Mail Majordomo@(protected) with the following text in body:
unsubscribe xsi
|
|
|