Welding Edges 2004-07-06 - By Jérôme Couture-Gagnon
Back
Non-border edges must be welded using point-based welding tools,
such as the Snap&Weld tool ("m" + keep Alt pressed) or, if there are many points
to weld, v4.0's new FilterPoints.
Notice: same limitation existed in v3.51
Jerome CGagnon
-- --Original Message-- --
From: owner-xsi@(protected) [mailto:owner-xsi@(protected)]On Behalf
Of Guillaume Laforge
Posted At: Tuesday, July 06, 2004 12:09 PM
Posted To: xsi
Conversation: Welding Edges
Subject: RE: Welding Edges
Are you sure your mesh is valide ? Edges can't shared more than two poly.
Guillaume - V2N
-- --Message d'origine-- --
De : owner-xsi@(protected) [mailto:owner-xsi@(protected)]De la part
de xsi@(protected)
Envoy� : mardi 6 juillet 2004 17:28
� : XSI@(protected)
Objet : Welding Edges
How can I weld two edges which are not a boundary?
applyTopoOp "WeldEdges", selection(0), siNode, siPersistent
does not work on internal edges and I cannot find any other command for
that sort of operation. The predefined commands "Weld Boundary
Point/Edges" and "Weld Edges" works also only on boundaries and "Weld two
edges" and "Weld two Points/Edges" does also not work. I thing all this
worked before in XSI 3.51.
---
Unsubscribe? Mail Majordomo@(protected) with the following text in body:
unsubscribe xsi
---
Unsubscribe? Mail Majordomo@(protected) with the following text in body:
unsubscribe xsi
---
Unsubscribe? Mail Majordomo@(protected) with the following text in body:
unsubscribe xsi
|
|
